Taps EPD
1 1

DLINE QST1150MP2 surface-mounted sensor basin faucet PVD copper

DLINE QST1150MP2 surface-mounted sensor basin faucet PVD copper

825QST1150MP2

€673,50 EUR
€673,50 EUR
Sale Sold out
Shipping calculated at checkout.

Delivery time: 77 days

Kleur: Copper Brushed PVD coating

Returns

For a quick and efficient handling of your returns, we request that you always contact us before returning anything. Returned products are eligible for a credit note if they meet the following conditions:

  • Returns must be made within 30 days of the invoice date.
  • The product must not have been used.
  • The product is returned in its undamaged and original packaging, suitable for resale.
  • Products that have been ordered especially for you and/or are not in stock cannot unfortunately be returned.
  • The product must be properly and securely packed in an outer box to prevent damage during transport.
  • The shipping costs for returning the products are at the expense of the buyer.

Please note: We reserve the right to charge return costs up to a maximum of 25% of the net sales value.

If you return an item outside the stated conditions or without a stated reason, the payment obligation will not expire and we can decide not to process future orders. In case of doubt, please contact our customer service.

Return Shipping

CitroenAir will also bear the costs for defective products returned to CitroenAir by the buyer. The product must be well and securely packed in an outer box to prevent damage during transport. Contact our customer service to have the defective products or parts collected.

Shipping countries

At CitroenAir, we ship worldwide. However, not all countries are set as standard shipping countries. Please check here if your country is on the list of shipping countries.

Is your country not listed? No problem, simply request a quote. We will prepare a suitable quote for you as soon as possible, so you can still order from us.

View full details

d line Qtoo infrared sensor basin mixer, stainless steel AISI 316, satin copper PVD finish.

Projection: 130mm - 5 1/8''
Fixed spout
Built-in aerator
Total height: 145mm - 5 45/64"
Height to aerator: 70mm - 2 3/4''
Max. flow: 5L - 1.3gpm

Sensor features:
Sensor operating detection range: 50mm to 250mm
Comfort time: 2 seconds (+/- 20%)
Time-out protection: 30 seconds (+/- 20%)
Flow rate 5 L/min (others available on request)
Battery life (6 AA): 20 daily activations = 8.4 years, 150 daily activations = 4.6 years
Low battery: 1 flash every 5 seconds (10 days)
Empty battery: 1 flash every 5 seconds (until battery is completely empty - and then no water supply)
Cleaning mode 60 sec.
Hygiene flush disabled
Special setting parameters on request: Operating detection distance, Time-out protection (deactivated or 1-240 sec.), Comfort time (0-100 sec.), Hygiene flush, Frequency (1 h - 72 h), Duration (1 - 240 sec.)

Mandatory accessories:
QSF01 Premix flexbox or QSF01 Single flow Flexbox

Optional accessories:
QSP01 Power supply for flexbox

Product care
d line products are manufactured from the highest quality AISI 316 stainless steel. To maintain the unique d line finish, please follow the instructions below:

Wash the surfaces with soapy water or a mild detergent.
Always rinse thoroughly with clean water.
To complete the cleaning procedure, dry/polish the surface with a soft dry cloth.
Do not use abrasive powders, steel wool, chlorine-containing cleaning agents, or other aggressive cleaning agents, as these may damage the surface.
If stains or corrosion appear on the surface, this is not due to the quality of the stainless steel, but to impurities in the environment, aggressive conditions, or incorrect or insufficient cleaning.

Product care
d line products are manufactured from the highest quality AISI 316 stainless steel. To maintain the unique d line finish, please follow the instructions below:

Wash the surfaces with soapy water or a mild detergent.
Always rinse thoroughly with clean water.
To complete the cleaning procedure, dry/polish the surface with a soft dry cloth.
Do not use abrasive powders, steel wool, chlorine-containing cleaning agents, or other aggressive cleaning agents, as these may damage the surface.
If stains or corrosion appear on the surface, this is not due to the quality of the stainless steel, but to impurities in the environment, aggressive conditions, or incorrect or insufficient cleaning.

Specifications

Article number 825QST1150MP2
Brand d line
Weight 1.5 kg
Operation Touchless
Colour Copper
Material Stainless steel
Assembly Tap hole
Power suply Batterijen
Collection d line Qtoo
Finish PVD-coating geborsteld